Main Rotor Servo Pushrod Tool Set
Slides in-between rod end bearing and mating clevis at each end of the main rotor servo pushrod while torque is applied to jamnuts. Sikorsky highly recommends this tool to prevent damage to the bearings. Includes 2ea tools with “REMOVE BEFORE FLIGHT” flags.
Hydraulic Pump Seal Replacement Puller
Required for hydraulic pump seal replacement. Reference P/N 1021 | Sikorsky
Hydraulic Pump Seal Replacement Step Plate Adaptor
Required for hydraulic pump seal replacement. Reference P/N 8058 | Sikorsky
Hydraulic Reservoir Servicing Pump
This package includes the following:
- Hydra-Pro service pump equipped with a 2 micron filter See details here
- Size AN4 female swivel hydraulic reservoir adapter and 10’ of high quality hydraulic hose (If a flareless MS fitting is needed in leu of the AN4 connector, contact us for current price)
- Wheel brake master cylinder adapter for pressure brake bleeding through the master cylinder, out through the caliper
Wheel Brake Master Cylinder Bleed Adapter
This adapter will facilitate fluid flowing out from the brake master cylinder into a container during the reverse bleeding method
Intermediate and Tail Rotor Gearbox Drain Tool
Fits in place of the B538A-3P Probe to drain the gearboxes. Comes with mil-spec “o” ring and 7 feet of hose.
Starter / Generator Bench Block
The starter / generator is held inverted on the dampener plate bushing for maintenance. It can be rotated by hand 360 degrees easily, without having to wrestle it all over the bench or the flight line. Also features flats on the sides for use in a vise. Made of solid plastic.